Autodata Manuals from ATG
- Timing Belts 2006
- Timing Chains & Gears
- Technical Specifications: Domestic 1994-2003
- Technical Specifications: Import 1994-2006
- Trouble Codes with Probable Cause: Domestic
- Trouble Codes with Probable Cause: Import
- Key Programming and Service Indicators
Timing Belts 2006
Produced specifically for North America this new publication is a repair manual for professional technicians. It provides all the information required for the inspection, replacement and tensioning of timing belts on domestic and imported cars, vans and light trucks from 1992-2006.
- Clear, concise "remove and install" instructions with torque values for each model on facing pages. Based on vehicle makers' information
- Engine damage may occur when a timing belt fails. Engines are identified as either "interference" or "freewheeling".
- Clear line drawings show belt routing for timing and balance shaft belts, belt tensioning method, engine positioning and locking methods, cam and crank timing marks.
- Vehicle makers' recommended belt replacement intervals (if applicable) for each model - helps auto repair shops encourage vehicle owners to have timing belts replaced regularly.
- Special tools are identified where required
- Labor times for removal and installation
- 2005 edition available in Spanish
Order your copy today for $70.
Call us today to order your copy: 800-233-3182 x325Timing Chains & Gears
Valve timing procedures for domestic and imported vehicles 1992-2003.
- 230 separate model related sections
- Special tools listed
- Valve timing procedures
- Valve timing marks
- Tensioner release and reset methods
- Chain routing
- Tightening torques
Order your copy today for $70.
Call us today to order your copy: 800-233-3182 x325Technical Specifications: Domestic 1994-2003
Researched from vehicle manufacturers' information, these two manual provides quick access to over 100 lines of the most relevant service and repair specifications for each model.
- Vehicle Identification
- Engine Management Systems
- Air Flow Metering Types
- Signal Trigger Locations
- Tuning
- Idle Speed
- Ignition Timing
- Spark Plug
- Service Checks and Adjustments
- Lubricants and Capacities
- Brake Dimensions
- Minimum Rotor Thickness and Runout
- Maximum Drum Diameter
- Minimum Pad and Shoe Thickness
- Tightening Torques
- Cylinder Heads
- Engine Component
- Steering and Brakes
- Complex Tightening Torque Sequence
- Technical Notes, Procedures, Preparatory Conditions and Illustrations
Order your copy today for $70.
Call us today to order your copy: 800-233-3182 x325Technical Specifications: Import 1994-2006
This new import manual contains technical data for automobiles and light trucks from 1994-2006. It provides automotive technicians with a reliable information source when servicing, maintaining and making adjustments to vehicles.
It provides specifications and data for:
- Tuning
- Service Checks and Adjustments
- Lubricants and Capacities
- Tightening Torques
- Brake Dimensions
Order your copy today for $70.
Call us today to order your copy: 800-233-3182 x325Trouble Codes with Probable Causes: Domestic
Code retrieval techniques are described using concise text and clear illustrations in separate sections for each model.
- Trouble Codes - accessing and erasing
- System Faults - locations and probable causes
- Code Types - MIL, OBD-I, OBD-II
- Based on Vehicle Manufacturers' Information
- Data Link Connector Locations
Order your copy today for $70.
Call us today to order your copy: 800-233-3182 x325Trouble Codes with Probable Causes: Import
Code retrieval techniques are described using concise text and clear illustrations in separate sections for each model.
- Trouble Codes - accessing and erasing
- System Faults - locations and probable causes
- Code Types - MIL, OBD-I, OBD-II
- Based on Vehicle Manufacturers' Information
- Data Link Connector Locations
Order your copy today for $70.
Call us today to order your copy: 800-233-3182 x325Key Programming and Service Indicators
This unique manual, covering domestic and imported vehicles 1994 - 2005 and researched from vehicle manufacturers' information, uses clear illustrations with step by step instructions to provide reset procedures for service indicators and key programming for each model on two separate pages.
Includes information for:
- Programming of keys/remote transmitters for remote control alarms and central locking systems.
- Programming of key/remote transmitters for stand-alone immobilizer systems.
- Battery replacement for the key or remote control transmitter.
- Resetting procedures for the service interval indicator.
Key Programming
- Easy to follow OEM programming techniques
- Correct identification of central locking remote controls
- System operation explained, includes unusual features
- Alarm, central locking and immobilizer systems
- Battery replacement techniques explained and illustrated
- Synchronization techniques
Service Indicators
- Clear illustrations show reset button locations
- Resetting procedures for service warning lamps




